产品描述/Product Description：

这是一种在物料粗粉碎、细粉碎、微粉碎中广泛应用的锤片式粉碎机。较传统单轴粉碎机而言，双轴粉碎机物料与物料之间剪切力更大，在等功率电机情况下更大程度地增加产量。

This is a dual-shaft hammer mill widely used for coarse, fine, and ultra-fine grinding of materials. Compared to traditional single-shaft hammer mills, the dual-shaft design generates greater shearing force between particles, significantly increasing production output under the same motor power.

专利产品/Patent Product：

该产品已获得国家专利，专利号ZL202022161777.X。

This product has been granted a National Patent (Patent No.: ZL202022161777.X).

产品亮点/Product Highlights：

①、粉碎机电耗降低6～8度/吨，物料温升降低到3～5度，减少水分损失约0.1%～0.3%，增加投入产出比；

Reduces power consumption by 6-8 kWh/ton, lowers material temperature rise to 3-5°C, decreases moisture loss by approximately 0.1%-0.3%, and improves input-output ratio;

②、采用独特的对撞技术，瞬间粉碎物料，粉碎效率提高30%~85%；

Adopts unique counter-impact technology to instantly crush materials, increasing crushing efficiency by 30%-85%;

③、对高纤维、比重轻、高油脂、高水份的物料产能可提高50%~100%；

For high-fiber, low-density, high-fat, and high-moisture materials, production capacity can be increased by 50%-100%;

④、高速对撞的粉碎原理，提高了粉碎细度及物料温度（物料温升≤5℃）；

The high-speed counter-impact crushing principle improves crushing fineness and material temperature (material temperature rise ≤5°C);

⑤、在使用孔径≤Φ1.5mm筛网、同等粉碎条件下，同比其他锤片粉碎机，每小时有效节能5~10Kwh；

When using screens with apertures ≤Φ1.5mm under the same crushing conditions, compared to other hammer mills, it effectively saves 5-10 kWh per hour;

⑥、高精度主轴动平衡（达国家标准G2，误差低于0.5个），整机运行更平稳，振动更小，使用寿命更长；

High-precision main shaft dynamic balancing (meets national standard G2, error below 0.5), ensuring smoother machine operation, less vibration, and longer service life;

⑦、人性化设计，安装使用及维修更方便；

User-friendly design makes installation, operation, and maintenance more convenient;

⑧、变频调速的喂料器位于锤片式粉碎机的顶部，均匀喂料，同时还起到重力分离和铁质分离作用；

The variable-frequency speed control feeder is located at the top of the hammer mill, ensuring uniform feeding while also serving as gravity separation and ferrous metal separation;

⑨、 SKF 轴承座，FAG轴承，运行平稳，温升低。

SKF bearing housing with FAG bearings ensures stable operation and low temperature rise;

⑩、1.5网孔以下，每吨饲料省5～8元。

For mesh sizes below 1.5, saves 5-8 RMB per ton of feed;

⑫、通过调节锤筛间隙，实现粗粉碎或细粉碎，做到一机两用。

By adjusting the hammer-screen gap, achieves either coarse or fine crushing, enabling dual-purpose use with one machine.

产能数据表/Production Capacity Data Sheet：